Túi Nilon Máy Đục Lỗ Vật Liệu Vải Kìm Đục Lỗ Màng Mỏng Túi Nhựa Túi Đóng Gói Hộp Cơm Hộp Đựng Túi OPP Một Lỗ Mở Lỗ

Giới thiệu Túi Nilon Máy Đục Lỗ Vật Liệu Vải Kìm Đục Lỗ Màng Mỏng Túi Nhựa Túi Đóng Gói Hộp Cơm Hộp Đựng Túi OPP Một Lỗ Mở Lỗ

[Name] ouge plastic bag punching pliers 0088
[Note] it is only applicable to rubber bags and film round holes.
● zinc alloy material with chrome plating on the surface and beautiful appearance.
● product size, 70X90X30MM.
Our plastic bag punching pliers are designed for punching plastic bags. Make 8MM round hole on the plastic bag.
0088 plastic bag punching pliers can make paper and film with a thickness of less than 0.2mm.
Hard film is not allowed. Only plastic bags or films can be made. (The plastic gasket is gently rotated by about 1mm every time it is laid, and the punching is perfect) after a period of time, use a screwdriver to squeeze out the waste in the cutter head, and the cutter head will be broken if it is not squeezed out, pay special attention to this point. You can punch all plastic bags without burrs after punching.